Check out our industry-funded projects PROPHET In the last decade the increasing penetration of renewables has been contributing to phase-out traditional power plants and to put Rotor profiles in twin-screw compressors Geometry of rotor profiles in twin-screw compressors This project was commissioned to GECOS by FNA Compressors and took place between Low-enthalpy geothermal plant optimisation Low-enthalpy geothermal plant optimisation This project was commissioned to GECOS by Sorgenia. It was developed between June 2015 and May Agrati di Veduggio industrial site revamping Revamping of the industrial site of Agrati di Veduggio The project was commissioned to GECOS by Agrati Group and started Cooled expanders for oxy-combustion This project is in collaboration with Amec FW for the IEA GHG program and EPRI. GOBiom EFFICITY Livorno Ferraris Combined Cycle power plant The project was developed between March 2014 and March 2015. Customer: EP Produzione (http://www.epproduzione.com/it/impianti/livorno-ferraris) For additional information or queries, please Heat exchangers for air conditioning and refrigeration The project aims at developing a calculation code and support in development of heat exchangers for air conditioning and refrigeration Compressed-air direct production system from energy recovery The project will start from March 5th, 2018 and will be concluded by July 31st, 2018. Please contact Prof. Gianluca XT65 air compressor tests The project was developed between March and July 2018. For inquiries, please contact Prof. Gianluca Valenti at gianluca.valenti@polimi.it. Thermofluid-dynamic characterisation of fuel oil atomisers The project was developed between January and July 2018. For inquiries, please contact Prof. Gianluca Valenti at gianluca.valenti@polimi.it.