CO2 capture and storage (with a bit of utilization) will be essential to decarbonize very hard-to-abate industrial sectors (cement and lime production and waste-to-energy plants) and will largely contribute to decarbonizing other hard-to-abate sectors (especially iron and steel production, oil and bio-oil refining, chemical industry including hydrogen production). In the long-term net-zero world, CCS will also be needed to capture CO2 from air in “negative emissions” systems.
According to scenarios by prominent agencies, 4-8 Gt/y of CO2 capture capacity needs to be installed worldwide by 2050 to meet the net-zero target. This roughly corresponds to the installation of 5 plants per week with 1 Mt/y capture capacity between 2030 and 2050.
For over 25 years, GECOS has been committed to supporting industrial end users in identifying the best CO2 capture technologies for their specific plants, and technology developers in understanding the potential of their solutions when applied to capture CO2 from different sources and in different energy system contexts.
We do this by:
- exploiting an extensive experience in process modelling and techno-economic analysis of a large variety of separation technologies (solvents, sorbents, membranes, advanced reactors) with different maturity, applied to a number of CO2 emitters (power plants, hydrogen production, cement, lime, iron and steel, refineries, flue gas from any source);
- supporting the design of pilot plants at TRL 5-8, by assisting engineering firms with process simulation for energy and mass balance calculations;
- developing dedicated optimization codes for the economic optimization of CO2 capture and CO2 utilization processes at plant level (i.e., optimization of process parameters) and at energy system level (i.e., optimization of plants integrated in an energy system dominated by variable renewable energy sources).
Main projects
- HERCCULES (HORIZON EU, 2024-29). The project “Heroes in Southern Europe to decarbonize industry with CCUS” deals with the demonstration of CO2 capture processes in waste-to-energy and in cement plants, including the transport and geologic storage of the captured CO2. www.herccules.eu
- ENCASE (HORIZON EU, 2023-26). The project focuses on the upgrading and co-development of “A European Network of Research Infrastructures for CO2 Transport and Injection”. GECOS is responsible for thermodynamic modelling activities, relevant for CO2 capture, transport and injection. www.encase-eu.com
- CALBY2030 (HORIZON EU, 2022-26) & EMPHATICAL (HORIZON EU, 2024-29). These projects deal with the application of Calcium Looping to capture CO2 from industrial processes and its conversion into e-methanol. GECOS participates in the process modelling of the post-combustion CO2 capture process from Electric Arc Furnace (EAF) steel plants and of CO2 utilization. TRL7 pilot plants will be constructed to demonstrate CO2 capture from EAF flue gases (CaLby2030) and its conversion into e-methanol with purification by advanced distillation (Emphatical). www.calby2030.eu
- ECCSELLENT (PNRR, 2022-25). Project funded by the Italian Recovery Plan (PNRR), related to the Italian node of the ECCSEL network, where GECOS designs, installs and commissions a new mobile pilot unit suitable to test new solvents and improved process configurations for post-combustion CO2 capture.
- LEILAC 2 (HORIZON 2020, 2020-26). The project aims at demonstrating at TRL8 the “Leilac” technology, for the direct separation of CO2 originated by CaCO3 calcination in cement plants, in an externally heated calciner. The pilot plant is designed to capture about 20% of the CO2 generated in the calcination process. GECOS is in charge of supporting the design of the demonstration plant, evaluating the impact on the operation of the host cement plant. www.leilac.com/project-leilac-2/
All projects in this area
Main publications
- Cremona R., De Lena E., Conversano A., Spinelli M., Romano M.C., Gatti M., 2025. Techno-economic assessment of high temperature heat pumps integrated in MEA-based post-combustion CO2 capture for cement plant. Carbon Capture Science & Technology, 16, 100446. https://doi.org/10.1016/j.ccst.2025.100446
- Zaryab S.A., d’Amore F., Colbertaldo P., Romano M.C., 2024. Utilization or Sequestration for Captured CO2 from Cement Plants? Ind. Eng. Chem. Res., 63, 20287-20303. https://doi.org/10.1021/acs.iecr.4c02268
- de Cataldo A., Astolfi M., Chiesa P., Campanari S., Romano M.C., 2024. Ultra-low emission flexible plants for blue hydrogen and power production, with electrically assisted reformers. International Journal of Hydrogen Energy 49, 978-993. https://doi.org/10.1016/j.ijhydene.2023.10.159
- Magli F., Spinelli M., Fantini M., Romano M.C., Gatti M., 2022. Techno-economic optimization and off-design analysis of CO2 purification units for cement plants with oxyfuel-based CO2 capture. International Journal of Greenhouse Gas Control 115, 103591. https://doi.org/10.1016/j.ijggc.2022.103591
